Showing 1–12 of 24 results

Avoidance Tools – SG33 Signal Generator

Trace the lines using the Cable Avoidance Tool. New industry accepted 33KHZ operating frequency for clearer signal reception. Enhance the detectability of cables and pipes, trace out the route of specific services. Use the Signal Generator to transmit an easily identifiable signal along a cable or pipe.

Avoidance Tools – SGV2 Signal Generator

Use the SGV2 Signal Generator to transmit an easily identifiable signal to a buried cable or pipe. The SGV2 has a 4 level 1 Watt signal output to provide an accurate and reliable signal to trace on a utility. Supplied with a large accessory tray containing connection leads, ground stake 10m earth lead extension and connection magnets.

Avoidance Tools – Signal Clamp

Apply the SGV2 Signal effectively to any cable by using the Signal Clamp. An extremely practical way to allow individual cables to be traced even when amongst other cables.

Avoidance Tools – Sonde

Allows the route of non-metallic pipes such as sewers, drains and large plastic gas and water mains to be traced using a Cable Avoidance Tool. Using the DXL2 allows identification of not only the position of the Sonde but also it's depth. Ideal for finding the position of blockages in pipes and powerful enough to be detectable at 7mtr depth.

Cable Avoidance Tools – CAT33 Cable Avoidance Tools

CAT33 Cable Avoidance Tool The CAT33 is a full function, industry standard locator which every ground working operative will find familiar and easy to use. Better by design the budget priced Cable Avoidance Tool is robust, lightweight and packed full of features inc. meter, detachable loudspeaker and fingertip controls. CAT33XD High Performance Cable Avoidance Tool With all the features of the standard CAT33, the CAT33XD is equipped with more power, more precision and more information from underground. The CAT33XD also has depth mode which when used in conjunction with the SG33 Signal Generator displays the depth of an applied signal on the YIRS 33 sonic with instant accuracy.

Cable Avoidance Tools – CXL Digital Cable Avoidance Tool

With additional combined 33/131kHz frequency to detect frequencies for small bore cables, the CXL2 Cable Avoidance Tool with the data logging provides a more reliable and improved signal detection in an ever increasing noisy and congested underground environment. The CXL2 has an Automatic Daily Self Test to ensure that it is working before use, and time stamped data logging to record when and how it is being used. In addition, there is no longer any requirement to send the units away for calibration checks every year, reducing the cost of ownership and the unit comes with a 3-year warranty. Other standard features include a fast response Auto Backlight LCD indicating signal level and battery condition and familiar operator controls.

Cable Avoidance Tools – DXL2 Digital Avoidance Tool with Depth

With all the features of the CXL2, the DXL2 had the added feature of Depth, which in conjunction with an SGV2 transmitter or a Sonde, allows instant depth measurement of the transmitted signal. The depth is indicated on the standard LCD

Cutting and Measuring – 5116660500 Manual Cutting Tool

For cutting cables from 6sqmm up to 500sqmm Weight: 3Kgs Length: 800mm Other sizes for manual cutting and crimping tools are available on request

Cutting and Measuring – CHC130 Cordless Hydraulic Crimping Tool

CHC130 14.4V Hydraulic Crimping Tool For crimping copper tube terminals 10-400mm2 using hexagon dies, the unit is lightweight and balanced for single hand operation. The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the connector and a slower more powerful speed for crimping. The crimping head can rotate through 180 degrees for ease of operation. The CHC130 will accept all semi-circular slotted dies, common to most 12 tonnes tools (U-Dies). Fitted with a maximum hydraulic pressure valve.

Cutting and Measuring – EDP230 Electrically Driven Hydraulic Pump

An Electrically driven hydraulic pump, powered by a 230V/50-60Hz single-phase electric motor. The remote hand controller allows advancement and pressure release on completion of the crimping operation. The mechanically actuated emergency button located on the pump body allows the pressure release at any time in case of power shortage. Also available EDP110 for 110-115V/50-60Hz Both models are IP55 rated

Cutting and Measuring – HHC085 Hand Operated Hydraulic Cutting Tool

Designed to cut copper, aluminium and telecommunication cable having a maximum overall diameter of 85mm

Cutting and Measuring – HHC120 Hydraulic Cutting Head

For use with the HHP1 Foot Pump. Designed to cut aluminium, copper and telecommunication cables having a maximum overall diameter of 120mm. Other sizes available on request