Showing all 8 results

Conduit Rod Accessories – Guide Tips

Supplied as standard with all Conduit Rods. The Tip guides the Rod through the Duct, the Eye allows pulling rope to be attached to the Rod. M277/2: Guide Tip Suitable for 14mm, 11mm & 9mm Rod M279/B: Guide Tip Suitable for 4mm & 6mm Rod The following 2 Guide Tips do not require end connectors and provide additional flexibility on tight corners. M277/7: Special Guide Tip to suit 11mm Rod M277/8: Special Guide Tip to suit 9mm Rod

Guides for the Duct – BM Steel Bellmouths

Inseparable hinged halves to guide the cable through the duct to avoid damage to both the Cable or the Duct. Also available in Plastic and Brass Bellmouths. Details on request. Special Sizes can be manufactured on request. BM60 for Ducts 60-69mm BM80 for Ducts 76-89mm BM90 for Ducts 90-97mm BM100 for Ducts 99-106mm BM125 for Ducts 124-130mm BM150 for Ducts 148-155mm BM160 for Ducts 152-176mm BM175 for Ducts 170-180mm BM200 for Ducts 194-212mm BM230 for Ducts 220-239mm BM250 for Ducts 246-266mm

Guides for the Duct – BM4R Four Rollered Bellmouths

Designed to be placed into the end of ducts to allow easy passage of cables into them. Fitted with 4no. steel rollers to ensure the cable does not rub on the duct edge from any angle. They are fitted with an adjusting bolt to secure them inside the duct. All steel construction, zinc plated and fitted with bronze bushes to allow free turning of the rollers. BM4R100 for ducts 99-106mm BM4R125 for ducts 124-130mm BM4R150 for ducts 148-155mm BM4R160 for ducts 152-176mm BM4R175 for ducts 170-180mm BM4R200 for ducts 194-212mm BM4R230 for ducts 220-239mm BM4R250 for ducts 246-266mm

Guides for the Duct – BMR Steel Bellmouth With Guide Roller

Inseparable hinged halves to guide the cable through the duct to avoid damage to both the Cable or the Duct. Also available in Plastic and Brass Bellmouths. Details on request. Special Sizes can be manufactured on request. BM60 for Ducts 60-69mm BM80 for Ducts 76-89mm BM90 for Ducts 90-97mm BM100 for Ducts 99-106mm BM125 for Ducts 124-130mm BM150 for Ducts 148-155mm BM160 for Ducts 152-176mm BM175 for Ducts 170-180mm BM200 for Ducts 194-212mm BM230 for Ducts 220-239mm BM250 for Ducts 246-266mm

Guides for the Duct – Cable Protecting Bend With Angled Base

To fit the rim corners of the manhole. Unit swivels to the direction of the pull. Zinc Plated

Guides for the Duct – Cable Protecting Bend with Handle and Stop

Used to protect cable and rope from damage occurring while going round bends. Zinc Plated CPB3: For Ducts inside diameter 89mm CPB4: For Ducts inside diameter 100mm

Guides for the Duct – Cable Protecting Bend With Snout

For Securing inside 89 or 100mm Ducts. Zinc Plated

Guides for the Duct – Cable Protecting Bend without Stop

Used for guiding cable or rope through bends to avoid damage to the cable or rope. Zinc Plated CPB1 - For Ducts inside diameter 89mm CPB2 - For Ducts inside diameter 100mm