Showing 1–12 of 13 results

Cable Rollers – Trench – CR1 Angle Corner Roller

Purpose designed for taking the heaviest cables around difficult corners and bends. Incorporates a vertical and horizontal roller 75mm diameter on low friction sintered bushes. Stake pins are provided to link rollers together into a continuous assembly on right angle bends. Paint finish. Height: 300mm Width: 160mm Length: 280mm Weight: 9Kgs

Cable Rollers – Trench – CR2 Skid Roller

Incorporates a horizontal steel roller 75mm Diameter running low friction sintered bushes with back skid plate for corner work. Can be used singly or linked together with stake pins provided to form a continuous run. Paint finish. Height: 300mm Width: 230mm Length: 330mm Weight: 8Kgs

Cable Rollers – Trench – CR4 Triple Corner Cable Roller

All zinc plated finish and using two vertical and one horizontal steel rollers identical to HSP125 for taking the heaviest cables around difficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linked together with stake pins provided to form a continuous corner roller system. Height: 295mm Width: 290mm Length: 540mm Weight: 12Kgs

Cable Rollers – Trench – CR5 Horizontal Roller

Two horizontal rollers with quick release gate opening to allow easy entry and removal of cables up to 125mm diameter. Paint Finish. Height: 400mm Width: 260mm Length: 250mm Weight: 13Kgs

Cable Rollers – Trench – CR6 Vertical Roller

Nine vertical steel rollers each running in roller bearings and mounted in a heavy duty steel frame. Paint Finish. Height: 310mm Width: 90mm Length: 830mm Weight: 14Kgs Note: These rollers are used in conjunction with CR5 as per the photograph and where large diameter cables have a limited bend radius.

Cable Rollers – Trench – DR1 Draw Off Roller

To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bushes. All mounted to a heavy duty angle steel base. Paint Finish Height: 220mm Width: 178mm Length: 1066mm Weight: 14Kgs

Cable Rollers – Trench – HBSP125 Bridge Roller

Generally, as per the HBSP125 Roller but with the added facility of being able to place same over a cable up to 90mm Dia already laid in the trench. Base Size: 350mm x 230mm. Weight: 4.5Kgs

Cable Rollers – Trench – HSP125 Heavy Duty Cable Roller

All Zinc plated heavy duty assembly suitable for cables up to 125mm Dia. Steel frame large waisted steel roller running on sealed ball bearings. Base Size: 350mm x 230mm. Weight: 4Kgs

Cable Rollers – Trench – HSR5 Heavy Duty Suspension Roller

To take the initial strain on the heaviest cable where they are lifted from the floor and onto cable trunking. The roller is suspended from a cross-beam or similar in front of the trunking. Large waisted steel roller running on sealed ball bearings. Paint Finish Height: 430mm Width: 120mm Length: 250mm Weight: 9Kgs

Cable Rollers – Trench – SP1 Skid Plate

Can be used with the CR2 Skid Roller as an alternative to the CR5/CR6 Corner Roller System. Paint Finish. Height: 300mm Width: 100mm Length: 920mm Weight: 7Kgs

Cable Rollers – Trench – SR5 Suspension Roller

To enable cables to be winched and suspended in high buildings prior to being positioned on gantries, beams etc. Zinc plated finish Height: 404mm Width: 240mm Length: 210mm Weight: 3Kgs

Cable Rollers – Trench – TRP76 Narrow Cable Roller

Designed for use in narrow trenches. Lightweight assembly suitable for cables up to 76mm Dia. Zinc plated steel frame fitted with large waisted solid aluminium roller running on low friction sintered bushes. Base Size: 320mm x 145mm. Weight: 2.75Kgs