Cable Rollers are designed to ease the procedure of handling and installing cables while on site. Suitable for general cable installation work in trenches, cable rollers are popular when dealing with telecoms, utility and power installations. Created with zinc plating, they are designed for durability and to sustain a reliable performance. Cable rollers ensure an easy installation and there is no better solution to guiding and protecting cables than these cable rollers.

In order to keep the cables in the best condition, cable rollers should always be used when pulling cables but especially in circumstances where the installation area is sharp or abrasive. Cable Rollers also make pulling the cable that much easier as there is less friction between the cable and the surface of the ground.

Cable Rollers are used so that when the cable is being pulled, it runs along the roller and not on the ground. Rollers are available in a range of sizes and can hold a variety of different weights depending on the size of cable. They are also available for applications with inclines and corners. These rollers keep the cable being pulled safe from any damage the surface may cause and also keep them out of any mud or muck that may be at the bottom of the trench. It is advised to not leave cables lying over-night. Prolonged exposure to the elements during the installation process can cause damage to the cables.

The Cable Rollers that are available from Reid Brothers UK are specifically designed for either Trench or Duct applications. Trench rollers are lightweight, for narrower applications, designed to lay on the ground and protect the cable from the surface. Duct rollers are designed to be placed at the entrance to a duct so the cable is protected from the rim and corner, to ease the cable in and avoid damage.

Depending on your application you may want to consider multiple Cable Rollers. To discuss your application needs with an expert or for the best available prices, feel free to call our team on 0141 425 1060 or get in touch via our Contact Form. We are always more than happy to help.

Showing 1–12 of 16 results

Cable Rollers – Duct – ERS76 Edge Roller Swivelling

For the protection of the rope on the rim and corner of the manhole. Unit swivels to the direction of the pull. Aluminium roller in zinc plated frame. Height: 180mm Width: 200mm Length: 270mm Weight: 4.5Kgs

Cable Rollers – Duct – ML5 Manhole Lead Roller

Designed for placing at the edge of a manhole or pit entrance to ease the cable in. Triple Aluminium Roller on tubular steel frame. Zinc Plated. Height: 630mm Width: 290mm Length: 500mm Weight: 14Kgs

Cable Rollers – Duct – RR3 Rope Guiding Roller

Used to guide draw ropes and cabling ropes out of manhole entrance and joint-boxes to avoid damage to the rope. Consists of an aluminium roller mounted on a zinc-plated frame, which has two lugs for location into the joint-box or manhole. Also available RR5 with a heavy duty steel roller running on roller bearings. Height: 150mm Width: 152mm Length: 254mm Weight: 4Kgs

Cable Rollers – Trench – CR1 Angle Corner Roller

Purpose designed for taking the heaviest cables around difficult corners and bends. Incorporates a vertical and horizontal roller 75mm diameter on low friction sintered bushes. Stake pins are provided to link rollers together into a continuous assembly on right angle bends. Paint finish. Height: 300mm Width: 160mm Length: 280mm Weight: 9Kgs

Cable Rollers – Trench – CR2 Skid Roller

Incorporates a horizontal steel roller 75mm Diameter running low friction sintered bushes with back skid plate for corner work. Can be used singly or linked together with stake pins provided to form a continuous run. Paint finish. Height: 300mm Width: 230mm Length: 330mm Weight: 8Kgs

Cable Rollers – Trench – CR4 Triple Corner Cable Roller

All zinc plated finish and using two vertical and one horizontal steel rollers identical to HSP125 for taking the heaviest cables around difficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linked together with stake pins provided to form a continuous corner roller system. Height: 295mm Width: 290mm Length: 540mm Weight: 12Kgs

Cable Rollers – Trench – CR5 Horizontal Roller

Two horizontal rollers with quick release gate opening to allow easy entry and removal of cables up to 125mm diameter. Paint Finish. Height: 400mm Width: 260mm Length: 250mm Weight: 13Kgs

Cable Rollers – Trench – CR6 Vertical Roller

Nine vertical steel rollers each running in roller bearings and mounted in a heavy duty steel frame. Paint Finish. Height: 310mm Width: 90mm Length: 830mm Weight: 14Kgs Note: These rollers are used in conjunction with CR5 as per the photograph and where large diameter cables have a limited bend radius.

Cable Rollers – Trench – DR1 Draw Off Roller

To lead the cable directly from the drum into the trench. 75mm diameter steel tube roller on low friction sintered bushes. All mounted to a heavy duty angle steel base. Paint Finish Height: 220mm Width: 178mm Length: 1066mm Weight: 14Kgs

Cable Rollers – Trench – HBSP125 Bridge Roller

Generally, as per the HBSP125 Roller but with the added facility of being able to place same over a cable up to 90mm Dia already laid in the trench. Base Size: 350mm x 230mm. Weight: 4.5Kgs

Cable Rollers – Trench – HSP125 Heavy Duty Cable Roller

All Zinc plated heavy duty assembly suitable for cables up to 125mm Dia. Steel frame large waisted steel roller running on sealed ball bearings. Base Size: 350mm x 230mm. Weight: 4Kgs

Cable Rollers – Trench – HSR5 Heavy Duty Suspension Roller

To take the initial strain on the heaviest cable where they are lifted from the floor and onto cable trunking. The roller is suspended from a cross-beam or similar in front of the trunking. Large waisted steel roller running on sealed ball bearings. Paint Finish Height: 430mm Width: 120mm Length: 250mm Weight: 9Kgs