Showing all 12 results

Lightweight Winches – C-1035 Lightweight Capstan Winch

The Lightweight Capstan Winch is designed for use over manholes. Powered by a Honda Engine through a right angle gearbox, the Capstan Winch is available with the following engine sizes 5.5HP Engine or an 8HP Engine. The units have a pulling capacity of 500Kg and 1000Kg respectively.

Lightweight Winches – Electric Winch

The Cable Puller provides the perfect solution for installing long or heavy lengths of cable in difficult locations. It reduces the manpower hours required to meet installation deadlines and is safer and faster. Technical Specification Max Drum Weight Kgs: 2500 Small Drums, 1500 Large Drums Rope Speed (meters/min): 2.5 Small Drums, 4.0 Large Drums Dimensions: L655mm x W550mm x H400MM Weight: 95Kgs Accessories Included Detachable Rope Storage Drum as shown (larger drum available as an option) Deadman Foot Control with 2mtr Cable. 2 x Tie Down Shackles. Other Information Unlimited length of pull and choice of rope speed Compact, lightweight and portable 110V or 240V AC model for internal use in buildings and tunnels Reverse rotation for controlled release at high loads

Lightweight Winches – PP1000 Portable Twin Capstan Winch

Safe, infinitely controllable pulling winch with variable speed from hold, through creep to full speed of 25mtr per minute. Ideal for pulling cables through ducts, in difficult locations. Reliable, easy to start Honda 5.5Hp engine with a centrifugal gearbox driving the main capstan gearbox and aluminium capstans through a flexible coupling.
  • Pulling Capacity: 1000Kgs
  • Twin Capstans: 100mm Dia
  • Honda Petrol Engine: 5.5Hp (4kw) 4 Stroke
  • Base Construction: Anodised Aluminium Fabrication
  • Anchor Points: Fitted Tested Shackles
  • Engine Speed Control: Throttle Lever
  • Load Retrieval Speed: Creep to 25m/min
  • Dimensions : 65cms (L) x 39cms (W) x 42cms (H) (with handles removed)
  • Overall Weight: 50Kgs

Power Cable Installation Winch – FW3000

The Cable Pulling Winch for Power Cables is an essential whenever cable pulling is involved. It is an extremely powerful component of the cable pulling industry and is designed to specifically cope with light to medium cable pulls. The cable winch unit is fitted with a pull load indicator with read out via dial gauge.
  • High quality Steel
  • Straightforward application
  • Easy to maintain and service
  • All technical information is provided below

Power Cable Installation Winch – TCW10

Fully enclosed steel canopied winches are an extremely robust piece of engineering plant, designed specifically to cope with medium/heavy cable pulls and other general utility pulling tasks. The TCW range is available in 3,000kg, 4,000kg & 10,000kg line pull capacities. The TCW range of winches are designed to be simplistic in operation, and thus you will find the winches are very straightforward to maintain and service. The result is a product which is cost effective, will provide many years of service, is easy to operate and simplistic to maintain. The TCW range of winches would be an excellent addition to your plant fleet.

Power Cable Installation Winch – TCW3000/TCW4000

The TCW range of twin capstan, fully enclosed steel canopied winches are extremely robust pieces of engineering plant, designed specifically to cope with light/medium cable pulling equipment and other general utility pulling tasks. The TCW range of winches are designed to be simplistic in operation, and thus you will find the winches are very straightforward to maintain and service. The result is a product which is cost effective, will provide many years of service, is easy to operate and simplistic to maintain. The TCW range of winches would be an excellent addition to your plant fleet.

Power Cable Installation Winch – TW5000

The TW5000 is currently our largest line pull winch and utilises the Twin Capstan design as a way of developing the required tension. The winch is a single axle and therefore easy to manoeuvre. It is fitted with a pull load indicator via the dial gauge and obtains its power from a twin cylinder diesel engine.
  • Power Unit - Diesel Engine rated at 19.1Kw at 3000rpm.
  • Main Drive - Independently driven twin grooved bull wheels.
  • Rewind Drum - Hydraulically driven for rope tension
  • Cable Payout - Via hydraulic system - powered
  • Pull Load Indicator - Via dial gauge for pressure/tonnes pull
  • Oil Cooler - Fitted with thermostatic fan
  • Rewind Drum - 750mtr x 14mm dia Rope
  • Rope Layering - Free moving layering arm
  • Rope Pull / Speed - No Load/Payout - 28mtrs/min
  • Rope Pull / Speed - 5.0 tonne - 12mtrs/min

Telecommunication Installation Winch – AW1000

The AW1000 Assist Winch is designed as a versatile multi-purpose winch, which can be used for the installation of Fibre Optic Cable, Sub Duct and also for pulling the bond back through the duct or trench. Console mounted line tension indicator with pre-set limiting facility. Available with either 13hp Petrol or Water Cooled Diesel Engine. An emergency stop device is fitted as standard
  • Line Tension - 500Kgs (760mm diameter capstan) for fibre optic cables.
  • Line Tension - 1000Kgs (380mm diameter capstan) for sub duct and general cabling..
  • Rope Speed - 55mtrs/minute 760mm capstan
  • Rope Speed - 26mtrs/minute 380mm capstan

Telecommunication Installation Winch – CW3000

The CW3000 Winch is designed to pull Telecommunication cable as well as general cable and subduct. The unit operates the tried and trusted method of a single capstan drive system which is now synonymous with the Telecommunications industry, the capstan is driven by a fixed displacement hydraulic motor. The case alloy capstan is fully guarded and is fitted with a limit switch as standard, which is activated and stops the capstan rotating as soon as the guard door is opened. Situated directly under the capstan is a swivelling diverter pulley to enable horizontal pulls to be made. Safety Emergency Stop buttons and limit switch to the rear guard. The winch is supplied as standard with the GRP Canopy.
  • Line Tension - 3000Kgs Maximum
  • Engine - 15.5Hp Water Cooled Diesel Engine
  • Console - Electrically operated directional controls
  • Line Speed - 0-12mtrs/min variable @ 3000Kgs
  • Line Speed - 0-30mtrs/min variable @ 1000Kgs

Tower Erection Winch

A mechanical winch designed to provide reliable and safe lifting operations for tower and mast erection for the electricity or telecommunications industries. Mounted on a sturdy trailer chassis with anchoring securing lugs. The four-speed gearbox offers a range of load and speed capacities to provide flexible lifting. Fitted with automatic fail-safe braking which ensures precise positioning. The unique mechanical load readout and controls are ergonomically positioned around the operating station. The mechanical design with no electrics or hydraulics gives high reliability and low maintenance.

Winches – Optional Extras – Canopy

Although our winches do not come with canopies as standard they are available for both the FW3000 and the TW5000 as optional extras, the model shown is the FW3000. The canopies can be available in different colours to match your corporate images and we are also able to sign write the canopies to provide you with free advertising while the unit is in transit. While the winch is in operation the canopy can be held in the up position by the catches as shown. Please enquire for further details and prices

Winches – Optional Extras – Data Log

An electronic recorder with digital printout which combines a high level of technical specification with ease of operation. It is designed to stop winching operations if pre-selected pulling tension is achieved, thus preventing possible damage to the cable. The recorder is available on our TCW, FW & TW range of power cable pulling winches and provides a combination of pulling tension, meterage and time. There is also the option to download data via a Micro-SD Card, which then displays the data in a standard Microsoft Excel format.