0141 425 1060

Mega Twister SP

Mega Twister SP Seals are a cost-effective securing solution, equipped with a pull tight twister seal. Used in a variety of different applications, these SP Seals are an upgraded version of the Mega Twister Seals as they have an improved design, which increases space upon the flap for marking purposes.

  • Tensile strength – 30 kg

  • 1,000 pieces per pack

  • Material (Body) – Polycarbonate

  • Colour Options Available

SKU: Mega Twister SP
£999.00

Details

Colour Coding

Mega Twister SP Seals can be applied with either coated or uncoated Stainless Steel wire with a diameter of 0.7mm or 0.8mm. Please ensure you pay close attention to the differing requirements in the table below.

Colour coding is made possible with the combination of the clear transparent body against the contrast of the twister caps which are available in a range of different colours. The twister seal caps stand out as they can be seen through the clear body of the seal, which improves the visibility and identification.

Heat staking treatment is used to permanently fasten the twister inside the body of the seal. This technology leaves clear evidence of tampering if the seal is cut or forced open.

Laser Marking

These Mega Twister SP seals are etched with permanent laser marking. Laser marking offers the highest level of security as it cannot be removed or replaced.

The side flap area of the SP Seal can be personalised to include markings such as company names, logos, sequential numbers or barcodes for identification purposes.

A maximum of 11 digits can be marked on the side of the flap.


Application

Securing of Utility Meters

Scales

Gasoline Pumps

Drums

Totes

Technical Specifications - Product

Product Code Material: Body Material: Twister Material: Cap Wire Length Wire Diameter Tensile Strength Marking Area Max Marking Digits:
MTW SP Polycarbonate Acetal ABS Customised 0.8mm Coated Stainless Steel 30kg 1mm x 2mm 11
MTW SP Polycarbonate Acetal ABS Customised 0.7mm Uncoated Stainless Steel 30kg 1mm x 2mm 11
Colour - White / Red / Orange / Yellow / Green / Blue

Technical Specifications - Inner Carton

Carton Quantity Dimensions Weight kg/carton Volume m³/carton
1,000pcs 410mm x 206mm x 125mm 3.64kgs 0.01056m³

Technical Specifications - Outer Carton

Carton Quantity Dimensions Weight kg/carton Volume m³/carton
5,000pcs 698mm x 434mm x 218mm 19.67kgs 0.06604m³